80% of EPS window frame failures happen before year four—not from material defect, but from undersizing. Contractors choose 80mm thickness to cut costs; homeowners pay €1,800 to replace cracked surrounds by year five. The real solution involves density selection and installation technique most builders ignore.
Most homeowners discover moisture damage in their EPS polystyrene facades only after cracks appear—but the water infiltration started months earlier behind the finish coat. The real protection happens at installation, not repair. Here’s what actually stops damage.
EPS polystyrene ceiling rosettes create architectural focal points at entry doors that signal quality and intentional design to visitors. These lightweight foam moldings cost 40–60% less than plaster equivalents while offering superior durability, moisture resistance, and easier installation.
An EPS polystyrene basement trim (soubassement) stops water from wicking into your wall assembly, the primary cause of mold, rot, and thermal loss. Installed correctly at the foundation line, it extends facade lifespan by 15–20 years while improving insulation performance.
A single architectural corbel placed on a facade tells any experienced eye whether a renovation was done properly or cut short. EPS polystyrene corbels are affordable and durable, but installation and finish details separate a professional result from an amateur one. Here is what actually matters.
When a renovated facade lacks pilasters, it signals incomplete architectural thinking — not just a style choice. EPS exterior pilasters define vertical rhythm, frame openings, and mark the difference between a polished finish and a flat render job. This article explains what to look for and how to get it right.
Installing decorative moldings on a finished ETICS facade seems risky, but it is entirely feasible without stripping or patching the render. The key is surface prep, the right adhesive, and mechanical anchoring where needed. This guide covers everything a contractor or homeowner needs to get it right the first time.
A facade cornice is the single horizontal element that separates a plain rendered wall from a house that reads as architecturally intentional. EPS polystyrene versions weigh almost nothing, resist moisture, and cost 80–90% less than their stone or plaster equivalents. This article explains why the cornice works, how to choose one, and how to install it correctly on an ETICS or bare render system.
Corners are the first place inspectors and buyers look on a renovated facade. EPS quoin corners either confirm a quality job or expose every compromise made during the project. Here is what you need to know before ordering or installing them.
An EPS exterior window sill does more than look good — it actively deflects water, defines the window opening, and integrates cleanly with external wall insulation systems. Skipping it or installing it wrong creates moisture infiltration that degrades both insulation and finish render. This article covers the real function, correct installation sequence, and material comparisons so you make the right call.